Revision Pong Those that are regular party goers have probably played this game in a social yet competitive environment and adapting it for the classroom is quite easy and flexible in the way it’s played. You just need a set of plastic cups (numbered), a ping pong ball and a set of questions (also numbered).
It can be played as a team game (I recommend no more than 3 per team to avoid down time). If team gets the ball in a cup say number 4, they then answer question 4 to gain points, I give 10 points for correctly answered questions. In order to keep the other team, team B, involved they can also be calculating the answer to “steal the points” if team A get it wrong or alternatively gain bonus points (I award 5). Team B would have to prove to Team A they got it correct by showing their calculations (I provide each team with mini whiteboards).
These great resources from @JR-Maths-Resources are not only beautifully presented and cover a range of topics, they are differentiated from fluency in the centre to reasoning and finally problem solving as the outside layer. I use these either daily as quick starters (they take around 10 minutes) or as short homework task.
Again some experimentation has led me to believe the best option here is to number the jenga pieces and use with a corresponding set of questions.You can see in the picture on the left that I do have a set of jenga pieces now dedicated to solving equations, but since numbering the pieces I’ve got a lot more use out of them! The game is played in the same way as the Jenna game, the only addition is that pupils must answer that question before they can remove that piece (if numbered, version on the left pupils would answer after removing it, if they get it wrong they go again). This can be differentiated, identifying the level of difficulty on the question card.
I create a revision carousel using a variety of different tasks, one at each of the stations for the topics in the carousel. The timer is set for 7 minutes at each station and pupils rotate through the stations in groups of 3-4. At each station they either answer the questions or taking part in the activity for example Fan & Pick. Therefore a verbal but brief explanation of each station is needed, and reminder notes on how it is played at each station also helps the carousel run smoothly.
Here is an example of a carousel I ran with 6 minutes at each station.
One of our favourite ways to revise, which we love is to use our revision foldables, check out our blog post Fold it to download it Revision Resources and click on the image below for our premium bundle of revision foldables.
This post is in addition to creating instant bar charts and pictograms using Post-It notes check out the previous post. Post-it notes are great for collecting information and instantly organising that data into a bar chart or pictogram to find the mode, median and range (if applicable).
Pie charts demonstrate proportions of amounts or a population, to ensure pupils understand this it is vital that they observe some basic proportions represented in pie charts. For example half choose red, a quarter blue and a quarter green.
I always introduce pie charts in this way using pie chart wheels. Pie chart wheels are easy to make. The Instant Pie Chart Template can be downloaded with instructions.
Print the pie chart template on four different colours, cut out and then secure the wheels in place using a pin and piece of card at the back.
Pupils adjust the colours by spinning to represent the results in the Power Point. Then ask pupils to give their own results that could be represented, or not if only four colours are available.
I always ensure I have red, amber and green in my pie chart wheels as they then double up as an assessment for learning indicator. Pupils display red when they require help, amber when they feeling more confident and green when they are confident and need more of a challenge.
Tallies and Pictograms
Another of my favourite data handling activities is to use music when reminding young year 7 pupils of how to tally. Pick a top ten hit with a repetitive song, as the song plays pupils have to tally the number of times the word is said!
Try it with Cheryl Cole’s “you have to fight for this love” and you have yourself a real challenge. Discussions can then be held about the modal word.
Check out our post on using post-its for instant pictograms on the classroom windows!
Get in touch @numberloving and check out our free and premium resources in our Store.
**UPDATED with Table of Values section below and mixed to improper conversion
Efficient Calculator Use
The need for pupils to be comfortable and confident with their calculator by the end of their KS4/GCSE studies is not new, but the new 9-1 specification has brought to my attention some new methods (not necessarily functions) that would benefit pupils in being able to perform using and navigating their calculators efficiently. As we follow the AQA 8300 specification many of this appear repeatedly in the practice papers. You might also be interested in our blog Can you Pay my Bills? 9-1 GCSE blog post, which looks at the bank statements, invoices and pay calculations as seen in the AQA practice papers. Any of the calculator methods described are not to replace understanding or written methods, in fact they are based on a mastery of techniques, particularly when considering remainders.
The new 9-1 specification AQA calculator papers include questions such as this calculation below. When performed correctly this would result in an improper fraction and pupils would be required to change to a mixed number.
I couldn’t understand why so many of my students were getting this wrong. So I asked a pupil to show me how they were entering this in the calculator and it turned out the problem was entering mixed numbers! The pupils were using the primary fraction button (red arrow) and using the ‘back’ button to insert the whole part before the fraction! The calculator would then interpret this as whole multiplied by the fraction part!!! When in fact they need to use the secondary function (green arrow) in order to insert the mixed number correctly.
These questions will give answers as an improper fraction and pupils may need to convert to mixed numbers (depending on the question requirements). Using the S>D function would give the whole part; instead use the shift button to activate the mixed to improper (orange arrow to left).
Although I have shown pupils this function in the past I have been reluctant to push it’s use because pupils need to complete prime factor decomposition for the non-calculator paper. However, increasingly expressing a product as its prime factors or finding the HCF/LCM is present on the new 9-1 calculator papers. To use this function, input the number for example 225, enter, then shift “FACT” and the calculator will express as a product of it’s primes. This was Q 24 from paper 2 of the foundation AQA practice set 3 which required pupils to express 225 as a product of it’s prime factors, this is awarded two marks. Pupils will save time if they use this function and that time can be used to complete the HCF/LCM part of the question.
This function can also help with questions requiring pupils to identify larger prime numbers as seen in Q3 of the Foundation AQA practice set 4, paper 3. If it is a prime number for e.g 97, after using the FACT function 97 would be displayed; therefore it is prime.
Table of Values
I had totally forgotten about this function, thankfully my Twitter colleagues @MrCarterMaths and @Mathematical_A reminded me!
Select mode (green arrow) which will give the four options seen on the display. Select option 3 : TABLE. You are then prompted by f(x) to enter the function, enter the function using the ALPHA key and the bracket key with the X (red arrows). Ensure pupils check carefully that they have entered this correctly. You are then prompted with “START?” followed by “END?”, both referring to the range of values of X in the table, e.g. from -2 to 5 (remember to us (-) for minus two), press enter after each. The final prompt is “STEPS?”, i.e. what is X going up in (most often one). Then a table of values is given in a vertical format. @Mathematical_A has mentioned that the new FX991EX has dual tables!!
Here is one of the treasure hunt cards requiring remainder to be found, again this was originally poorly answered by my pupils despite it being on one of the calculator papers. This style of question is seen in the AQA foundation practice papers, for example Q12 from paper 3 of set 3.
Below is the method we show pupils to tackle this efficiently; this slide is taken from our Walking Talking Mock.
Scientific calculators can be used to set a number of decimal places (using shift>set up>6. Fix), however this is not something that I choose to show pupils; they should be able to round correctly and there’s too much of chance they don’t change it back! So instead it is good ‘exam technique’ to insist pupils write down the whole answer and then round as required. Again a slide from our walking talking mock on the left demonstrates these calculator paper tips.
To help refine pupils calculator paper skills we have produced some resources for use with a scientific calculator and knowledge of skills such as Pythagoras’ Theorem, Trigonometry etc. Therefore this resource is best used once you’re confident pupils have the range of skills on the topics listed below.
9-1 Calculator Use Resources
The first new resource is our 9-1 Efficient Calculator Use Treasure Hunt activity differentiated to two levels; amber and green. The amber level covers the following topics; finding remainders, calculating with fractions, improper to mixed, area of fraction of circle, product of primes, Pythagoras, Rounding. The green level covers Trigonometry, remainders, compound interest, density, rounding, area of sector, scales, conversions, using formula. Each of these require pupils to round correctly i.e. decimal places or significant figures.
Check out our Treasure Hunt blog post for different ways to use treasure hunt activities in the classroom and beyond.
The second resource is our 9-1 Efficient Calculator Use Worksheets which includes two worksheets to complement the first resource to make a full lesson or use as homework. Worksheet 1 covers six topics (powers/roots, place value, remainders, primes, fractions and percentages). Worksheet 2 covers three overall topics but each progresses in challenge (use of formula, right angled triangles i.e. Pythagoras’ theorem and trigonometry, circles (arcs/sectors).
A quick hello to all readers! It has been a while, we have been busy behind the scenes creating new resources to meet the new 9-1 specification.
Bills and Statements, Debits & Credits, Task Cards is one of our latest resources which is designed to cover all money related questions as seen on the new 9-1 specification GCSE, in particular on the AQA exam board. This resource includes 5 Bill Statement, 4 Pay statements and 4 Bank statement task cards, instructions and solutions. Here is an example of one of the task cards, in this task card pupils are required to find the missing balances from the bank statement, ensuring pupils understand ‘debit’ and ‘credit’.
To complete this resource we have designed this quic and simple starter resource, included in the download. Pupils answer questions on mini-whiteboard. In doing this activity first with my class I was able to introduce terminology such as debit, VAT and recap calculating pay (see the example below)
Check back soon for our next blog on calculator use resources!